🛠️ Requirements & Fix Guide

Solution: Disabled and Enabled GeForce overlay

Solution: You need to press the SONAR's bind before launching so that the overlay works.

Solution: Open SteelSeries → Settings → MOMENTS → Capture and sound → Turn off "ALLOW MOMENTS TO CAPTURE WHILE GAMING"

Solution: Reinject, if it does not help, you need to run the overlay as an administrator

Solution: install the library from the link - vc_redist.x64.exe

Solution: Need reinject

Solution: Problem with your internet connection, you need to check your connection and try again, maybe you are using VPN

Solution: The driver was installed incorrectly, you need to reboot the pc and try again (If you are in an internet cafe but the error is recurring, you need to try another PC). If it doesn't help, clean the autorun programs.

Solution: You need to turn off all protection and remove all anti-readers and antiviruses from your PC. If it doesn't help, clean the autorun programs.

Solution: You need to uninstall the Vanguard/Faceit antichip from your PC and try again

Solution: This error means the processor does not support AES instruction set, so it cannot be fixed.

Solution: To fix this error, enter the BIOS and search for a feature named either "Intel virtualization technology" or "Intel VT-X"/"AMD-V" or "SVM mode" and enable it.

Solution: To fix this error, go to "Control Panel" -> "Programs and Functions" -> "Enable or disable Windows Functions" and make sure that "Virtual Machine Platform" and "Hyper-V" are disabled.
If the error persists, open cmd as an administrator and enter the following command without quotes bcdedit /set hypervisorlaunchtype off, then press Enter and restart the computer.
If the Windows 11 user and the previous methods did not help him, then you should run PowerShell as an administrator and paste the following command there (in full):
takeown /F "C:\Windows\System32\hvix64.exe"
icacls "C:\Windows\System32\hvix64.exe" /grant *$(([System.Security.Principal.WindowsIdentity]::GetCurrent()).User.Value):For
takeown /F "C:\Windows\System32\hvax64.exe"
icacls "C:\Windows\System32\hvax64.exe" /grant *$(([System.Security.Principal.WindowsIdentity]::GetCurrent()).User.Value):F
del "C:\Windows\System32\hvix64.exe"
del "C:\Windows\System32\hvax64.exe"

Solution: Turn off the spoofer or turn off the RAID in the BIOS settings with a complete reinstallation of Windows.

Solution: To fix this error, convert the disk containing the operating system to GPT format using the mbr2gpt tool built into Windows or any other disk management utility of your choice. The BIOS needs to switch from Legacy mode to UEFI mode.

Solution: For PC, the graphics card is old and unsupported. For laptops, you need to disable the built-in graphics card in the BIOS.

Solution: Open cmd as administrator, enter these commands one by one
wmic diskdrive get Caption, SerialNumber
wmic baseboard get SerialNumber
If any of those commands failed with an error then something is wrong with your pc, try to reinstall Windows and check if the problem is gone.